Changelog v8.32.0
-----------------
#myBOX V8
Improved
* Stability & performance improvements.
* Security improvement
Fixed
* Minor bug fixes
Changelog v8.30.0
-----------------
#myBOX V8
Added
* Spanish translation
Removed
Improved
* Stability & performance improvements.
* Security improvement
Fixed
* Minor bug fixes
* Recipes online edit
Changelog v8.29.0
-----------------
#myBOX V8
Improved
* performance/minor bug fixes
Changelog v8.28.0
-----------------
#myBOX V8
Improved
* General security improvement
Fixed
* OPC UA tag listing/discovery, communication with username/password protected OPC UA servers
Changelog v8.27.0
-----------------
#myBOX V8
Improved
* performance/minor bug fixes
Fixed
* Backup / Restore
Changelog v8.26.0
-----------------
#myBOX V8
Fixed
* minor settings bugs
Changelog v8.25.0
-----------------
#myBOX V8
Fixed
* Proxy (You can only enter IP address as a destination IP)
#General
Improved
* OPC UA read/write
* Stability & Performance
Fixed
* notification emails from CAS alarms
* Linux myACCESS connection
Changelog v8.24.0
-----------------
#myBOX V8
Fixed
* minor bugs
Changelog v8.23.0
-----------------
#myBOX V8
Added
* Proxy settings (In Advanced network)
* SSL settings (In Advanced network)
We do not recommend “playing/changing†with above new settings if you don’t have knowledge or experience.
* Possibility to select interface for port forwarding
Fixed
* Password change for downloading project
* Network can’t be set until the myBOX loads it’s own configuration
Changelog v8.22.0
-----------------
!!!!!!!!!!!!
This release is a major security update fixing multiple vulnerabilities as reported in security audits ICS-VU-330627 and ICS-VU-757224. To increase the security of the mySCADA platform to the maximum,
we have upgraded the password hashing. Now we use SHA512 hash (highest possible) along with multiple security improvements. Upgrade note: logging through RFID cards has been redesigned. If you use RFID
card logging you need to reenter the password for all your RFID users in the project after the update. Also, please update passwords for /api and /apilive if you use REST API in your project.
This update is recommended to all users.
#myBOX V8
Fixed
* minor settings bugs
Changelog v8.21.0
-----------------
#HMI
Fixed
* Prompt on the script in the set command wasn’t working properly
Changelog v8.20.0
-----------------
#HMI
Improved
* Performance improvement
Changelog v8.19.0
-----------------
#HMI
Improved
* Performance improvement
Changelog v8.18.0
-----------------
#HMI
Fixed
* The effect wasn’t looping forever when the option was checked
* When you displayed any table (CAS alarms, DLGs) without bottom/upped toolbar it left there an empty space instead of scaling the table to the full size
* We have allowed a maximum of 60 years for running hours, we also have added an option to set a year in set command.
* Displaying history dlg/cas alarms using from+int or to+int wasn’t working properly.
* Row click callback on CAS alarms was returning “undefined†on message
* Replacing multiple “spaces“ in datalog
* Timeline icons weren’t working correctly when you were looking thru myACCESS link
* myscada.getUrlParameters wasn’t working correctly with character “+â€
* Datalog view as a chart
* When viewing Linux based device via. myACCESS it wasn't displaying images on timeline correctly
Fixed
* When you had myBOX set on DHCP and didn't plugged cable in 1 minute port switched to sleep mode and it wasn't able to get IP anymore which
Changelog v8.17.0
-----------------
#HMI
Fixed
* myscada.alarmConfirm now confirm all alarms
* Fix of running hours (The count of running hours reset after re-downloading project which shouldn't happen)
#myBOX V8
Improved
* myBOX menu now displays a firmware version of LTE modem.
If the firmware version of the modem in your myBOX is under 12.5, please contact our support.
Changelog v8.16.0
-----------------
#HMI
Added
* #Export section (You can now export selected period of time into .CSV file) Works also using myACCESS.
* When you are logged as a user in HMI you can right-click on the "key" icon and change your password.
Improved
* Some effects wasn't working properly
* getText was returning enterText
* myscadaAlarmConfirm wasn't working properly.
Fixed
* Viewing documents via. myACCESS
* myscada.logUserAction
* box plot graph
* Some "special" utf8 letters couldn't be logged/displayed
#myBOX V8
Fixed
* When you set user or edited admin user inside settings and factory reset the box the users were still there
Changelog v8.15.0
-----------------
#HMI
Improved
* Possibility to change your password by right-clicking on logout button when you are logged in
* Possibility to display any dlg view
Changelog v8.14.0
-----------------
#HMI
Fixed
* mySCADALoggedUserLevel
* Set command on time on each click increment time by 1 hour
#General
Improved
* Minor bug fixes and performance improvement
Changelog v8.13.0
-----------------
#HMI
Added
* Parameters in equations
* New demo default project
Removed
* Removed old demo project in the device (Bottling machine demo)
Improved
* Overall virtual keyboard functionality
* Added Virtual keyboard to the settings page
* Added function to hide/autohide or change the size of the virtual keyboard
Fixed
* Fixed old Combobox (Callback)
* loggerUserLevel repair
* recipe duplicate rows during active filter
* recipe remove rows during active filter
#myBOX V8
Fixed
* Sometimes when you unplugged cable interface wasn't displayed correctly
* When you entered modem section it popped up some false error dialogue which was removed.
#General
Improved
* New startup of the node
Changelog v8.12.0
-----------------
#HMI
Added
Removed
Improved
* equations
* view script
* Overall performance improves (Optimized view script/server-side script functions which can radically improve performance of myPANEL 5" and 7" and its RAM usage and script execution order) Other devices should also have a noticeable performance improve
Fixed
* Write Scale for Recipes (Single writes + multiple writes)
* Open command on Active area from view script (When the view was called 12_comething_2 it took 12 as pre-fix, so it does not open view properly)
* Time to time momentary button got stuck (Added Multi-click protection - Can be set on each view under view property and its rate can be adjusted)
* Pop-Up center + fixed size
* myscada.writeTags (Wasn't working properly)
* Online users edit could not give group to a user
* Online users edit could not see buttons for cancel or save for the group
* Fixed dissappearing rows in table (DLG etc...)
#myBOX V8
Improved
* Some minor visual bugs which DO NOT affect the functionality
#General
Improved
* Updated Stimulsoft Reports
* Webpage (Better visual appearance + more friendly to new clients added explanation videos and some more)
Changelog v8.11.0
-----------------
#HMI
Fixed
* Vertical measure in trends (Drag point of a vertical measure was a bit off so it was difficult to drag it with the cursor
* Pop-Up location Center
Added
* Vertical measure on click/touch (When you activate the feature in myDESIGNER you will be able by touch or click put a vertical measure inside trend)
#myDESIGNER
Removed
* Dummy tag on </> "Text inside" component which could be generating warning that there are non-existing tags when checking project.
Added
* Automatic vertical measure set-up + additional features (Color of measure line and thickness etc…)
* Tool for selecting data-log data to ascend/descend (Left click on datalog and you can check/uncheck option on dlg properties)
#myPRO
#myPANEL
#myBOX V8
Added
* Password for downloading project (As in myPRO you can give your device a unique password before for downloading project was only required to have SN of myBOX)
* WiFi scan (In case of using wifi as WAN)
#myCLOUD
Improved
* Changed overlay of myCLOUD improved its visual appearance
Added
* Latency measure
* Network scan when connecting to the myBOX V8
* Network interface (LAN IP address, WAN IP address etc…)
* Dial process
Other
myCLOUD renames to myACCESS
#General
Added
* communication with Net-Eni Eth card for Compactlogix
* User access for "Show edits" and "Live buttons"
Changelog v8.10.0
-----------------
- Active recipe filter fix (Bool, Multiple Choice need to add activeRecipeFilteredData['a_string"] in order to display bool/multiple choice)
- Added WiFi set-up as a WAN in network configuration
- Added LTE backup
- Added Debug section
- Added Logs section (You will be able to see error logs etc... more in manual)
- Added Scripts section (For debugging server-side scripts)
- Fixed minor visual bugs
- Performance improve
Changelog v8.9.0
-----------------
- Fixed active recipe filter from scripts issue
- Improved alarm handling speed
- Redesigned user and recipe synchronization
Changelog v8.8.0
-----------------
New Options:
- redesigned Open dialog, more intuitive time selection
- improved undo/redo manager
- HTML Label - can be now used as WebSocket console
- For failed project downloads show error number and description
Fixed Errors:
- Entering max and min values in set command in component creation
- parametric screens
- fixed running hours editing when there are no table items
- Reporting module now works when accessed over the Cloud
Changelog v8.7.0
-----------------
- HTML Label - added option for vertical-align, removed margins added align for text instead
- font handling improved
- fixed appearance for data-logs, trends, alarms
- columns widths reorder
Changelog v8.3.0
-----------------
- allow dynamic limits in animations. Eg. enter tag or value for minimum and maximum limits
- added support of Unicode string (WSTRING) data type for S7 communication
- extended recipes
- new components
- minor bug fixes and performance improvements
Changelog v8.2.0
-----------------
Changelog v8.1.0
-----------------
- mouse zoom in charts
- speed improvemens
- minor bug fixes and performance improvements