3.Using myPRO WWW access
Once myPRO is installed, you can access the HMI over the regular web browser. Recommended browser is:
- Chrome or any other chromium-based browser
Open your web browser and into the address bar enter https://localhost or http://127.0.0.1 then you will be presented with the introduction screen. You can go into the settings menu or into the online manual.
- NOTE: We also recommend using “Anonymous window”.
Opening mySCADA at specified View, Trend, etc.:
to open www at the specified view, trend, data-log, or alarm view, use one of the parameters after your link.
When you specify a name, please use only ASCII characters accepted in URL links, all special characters must be escaped (for example a “space” is escaped as “%20”). You can use online URL escape tools such as http://meyerweb.com/eric/tools/dencoder/. You can easily see which parameter to pass if you look at the address bar of your browser.
Loading custom project:
Download and install myDESIGNER from our web pages https://www.myscada.org/download. Create your project in myDESIGNER and download it to your PC running myPRO. If unsure, follow the Getting started tutorial provided with myDESIGNER here: https://www.youtube.com/watch?v=QZ-V6jRCNPk.