Title of your website

myBOX USER MANUAL
Version 7

Online manuals

  1. Introduction
  2. Hardware Overview
    1. Hardware features
    2. Technical specifications
    3. Dimensions
  3. Installing your device
    1. Mounting the device
    2. Power wiring and device start-up
    3. Getting online help from mySCADA
    4. Reset to default settings
  4. Communication connections
    1. Connecting to networks via ethernet interface
    2. Connecting to networks via RS-232/485 interface
    3. Using the RS-232 interface
    4. Using the RS-485 interface
    5. Connecting to networks via wireless 3G interface
    6. Access point mode with wireless Wi-Fi integrated card
  5. Graphical user interface
  6. Administration level
  7. Appendix A – termination and biasing an RS-485 network
  8. Appendix B – list of supported web browsers for the GUI

4.6.Access point mode with wireless Wi-Fi integrated card #

Please note the following information applies only to the Wi-Fi versions of myBOX, which are equipped with the wireless modem.

myBOX can be equipped with a Wi-Fi access point card. If activated, you can connect to your device via Wi-Fi networks. Please note that standard protection can be applied for security reasons and there is a maximum of 7 simultaneous connections that can be achieved.

« Connecting to networks via wireless 3G interfaceGraphical user interface »
Suggest Edit